|
PASTE HANDLING & STORAGE
STORAGE
 | Store paste in an area shielded from extreme heat and
cold. Ambient temperatures from 40o F to 72o
F are recommended.
|
| Do not store near open flames or sources of high heat.
|
| Rotate paste stock, using "first in/first out"
procedure. Nominal shelf life period is six (6) months for
paste in the jars, three (3) months for cartridges. |
STIRRING
| Before loading paste into reservoir, gently stir with a
spatula using a lifting motion to insure complete
homogeneity. This mixing should be done even if no
separation or layering is apparent. Metal spatulas should be
avoided because they can cut bits of plastic from the
container and leave them in the paste. DO NOT MIX WITH POWER
MIXER WITHOUT CONSULTING WITH THE FACTORY.
|
| Do not attempt to thin paste with outside diluents!
Adverse chemical reactions may occur! |
PROPER USE
| Read and understand the product MSDS before use.
|
| Keep paste jar sealed until time to use. If jar's contents
not completely emptied, tighten lid to prevent extended air
exposure. (For best results, paste should be used within a
week of opening sealed jar.)
|
| Do not re-use paste jar when empty.
|
| Use minimum paste pressure (in Dispensing system), and the
shortest length of paste hose. Use largest possible diameter
nozzle, which has the shortest extension length.
|
| Solder or braze in a well ventilated area.
|
| Wash paste from skin with soap and water, or waterless
hand cleaner.
|
|
